In 1999, the Chevy / GMC Trucks

For best results, please read the instructions before proceeding with the installation of your flap handle relocator. Sir Michael recommends the use of approved hand, eye and ear during this installation.

Remove the first tailgate of the car and place (setting up a plant holder) on the bench saw horses or work.

2nd Remove Snap-in plastic casing around the tailgate handle. NOTE: It should be considered in the process, when not on the two files that damage the lining to keep them in position. On the third to open the flap (factory handle down) and remove the handle of the tailgate handle flap by cutting assembly and lock metal rods. 4th Paragraph supplied template mark with three rear door handle hole and remove the plate. 5th Cut pre-selected field of sheet metal on the inside back flap of the death of a grinder or jigsaw with a blade of steel. 6th then screw the tailgate, tailgate handle relocator mounting plate using the supplied hardware. Use screws to screw the handle Relocator. Damage to the outer leg occurs when you use the factory bolts. 7th Place relocator panel flap handle with a handle on the spot in the center of the flap and the Relocator. Use the supplied # 8 sheet metal screws. Re-attach the handle bracket links with tailgate tailgate. Note: Flip the plastic clips, so that the insert from the bottom.

8th now exactly snap plastic frame around the factory grip flaps. Turn on the tailgate (original opening handle) and drag the color from all over the flap handle break (about two inches) and welding filler instead of the proposed panel. NOTE: Do not try to form one continuous WELD BEAD arises outside excessive tailgate damage to the skin.

Finally, the ninth joint wear, apply filler, sand the match block, primer and paint. Now you can install new tailgate handle flaps fitted Relocator back in the car.

Many interesting information and articles suspension, please visit http://www. stylintrucks. com / sn aspx? Category | category_root | -1 = Interior


Article Source:plastic welding