HOW PLASTIC WELD

Boat on the grass

• With MINI-WELD MODEL 6 plastic welder

 

I was not able to find the price of this article.

It costs about $ 15 to fix.

 

First make sure that the workplace is clean and well ventilated. Be careful when using the mini-welder for welding plastics. Plastic welder is hot and can burn and cause a fire.

2nd Place plastic welder and heat were welders.

Clean the third part to be made.

4th There is a big missing piece of plastic.

The fifth was looking for a symbol of this page, I could not find it. So I have uni-flex welding wire, match the color ok, and holds many different types of plastics.

6th Set the heat of the welder to the UNI-flex welding wire.

7th I put a grid of stainless steel (will fill out a set of Mini-Weld Model 6) to the void.

8th I first welded mesh in place.

9th then adjusted to fit the grid void.

10th once uni-flex rod with fiber to fill the void.

11 And fill the void at the front and rear. Stainless steel mesh to give more strength to break. Let the warmth of plastic welder for most of the work for you.

12 Try to smooth the weld as much as possible.

13 damp cloth. Cool welded parts sand and started it.

14th I use 60 grit sandpaper to start. This should mostly fall down. Then I go to 180 grit sandpaper to smooth.

15th Now make sure that the part located on the rear of the mower. If I can not sand or more, or use the welder to certain adjustments. If you want to go kandjwarehouse befor and after photos. com

 

THANK YOU

Kandjwarehouse. with


Article Source:plastic welding